Lenovo PC with Graphics Card Dual Monitor Connect
A Guide to Setting Up Your Lenovo PC with a Dedicated Graphics Card for Dual Monitors!
Step 1 Unpack the computer and monitor from the box and packaging. Place items at the designated desk or work location. Locate the ports on the back of your computer.
Step 2 Locate the cables that will connect your computer to the monitors. There are 4 possible connector cable options:
Find your designated cables and identify the connectors.
Step 3 Your computer has a dedicated graphics card installed. You need to connect the monitors to two of the graphics card video outputs and not the motherboard video outputs. Whenever a graphics card is installed the motherboard ports are deactivated. If you attempt to connect to the motherboard video ports you WILL NOT see any video on your monitor. The graphics card ports will be near the bottom of the rear of the computer. You must connect BOTH monitors to video outputs on the graphics card only. The motherboard video ports WILL NOT work. Connect to either the DisplayPort, HDMI, DVI or VGA port on the graphics card (depending on the available ports for your graphics card model). Connect one end of your cable into the designated port on your graphics card and plug the other end into the designated port on the monitor. Do the same for your second monitor.
If using a VGA or DVI cable, tighten the screws of each end into their port to keep the cable more secure.Be careful to correctly identify the right port to your cable, do NOT try to force the cable as you could damage the connector or the port on the computer.
Step 4 One of your monitors may have a different port than your PC. (Ex. Monitor is VGA but you need to inputa DisplayPort into your graphics card). In these scenarios you may need an adapter. There are many kinds of adapters, but if you monitor and PC need one, it should be included in your items. Here are some examples of adapters:
Step 5 Unpack your keyboard and mouse and plug both into any available USB ports on the back of the computer. You may have also been given a Wi-Fi or Wi-Fi/Bluetooth adapter to help give your computer a stronger internet connection. If you have one of these, you will also plug this into a designated USB port on your computer.
Step 6 If using headphones or external speakers, you can insert them into the audio port on your computer. This will be a green port on the back and blue on the front of your computer. If using a microphone, you can connect it to the designated mic port which is blue/pink in the back and pink in the front of yourcomputer. Some audio and microphone devices may connect through USB. If so, connect them into available USB ports. Devices vary therefore, these instructions may not work for everyone and their audio needs.
Step 7 Locate your power supply cables and plug one cable into the power socket in the back of the computer and the other into the monitor. Then plug in both cables into a surge protector or the wall outlet.
Now you are ready to use your computer! Press the power button on the front to turn it on. Enjoy!
Sample Block Quote
Praesent vestibulum congue tellus at fringilla. Curabitur vitae semper sem, eu convallis est. Cras felis nunc commodo loremous convallis vitae interdum non nisl. Maecenas ac est sit amet augue pharetra convallis nec danos.
Sample Paragraph Text
Praesent vestibulum congue tellus at fringilla. Curabitur vitae semper sem, eu convallis est. Cras felis nunc commodo eu convallis vitae interdum non nisl. Maecenas ac est sit amet augue pharetra convallis nec danos dui.
Cras suscipit quam et turpis eleifend vitae malesuada magna congue. Damus id ullamcorper neque. Sed vitae mi a mi pretium aliquet ac sed elitos. Pellentesque nulla eros accumsan quis justo at tincidunt lobortis denimes loremous. Suspendisse vestibulum lectus in lectus volutpat, ut dapibus purus pulvinar. Vestibulum sit amet auctor ipsum.